Locomotive 4 8 4 - The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ...

 
The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483, . Fart dominationandved2ahukewi278d24y6aaxvdg4gkhr_md2k4chawegqiahabandusgaovvaw2s nypcj2o_ola_k2r yyr

Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ...Union Pacific's own team, in conjunction with Alco (both parties had also collaborated on the 4-6-6-4), significantly enlarged the Challenger to create the 4-8-8-4 Big Boy. The locomotive offered a tractive effort of roughly 135,000 pounds (37,650 pounds more than its smaller cousin) with speeds capable of 80 mph.The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ... Feb 9, 2018 · Rio Grande Info cited Robert Schaefer's "D&RGW 4-8-4 Westerns" in "The Prospector", Volume 2 Number 2 for the very interesting origin story of this class. Originally the D&RGW was attracted to Alco's variation on the Delaware, Lackawanna & Western's 4-8-4, in part because Alco had developed a single-piece cylinder and frame casting. Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ...The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...The Atchison, Topeka & Santa Fe bought a total of 65 4-8-4s, in four batches, all from the Baldwin Locomotive Works. The first group of 14 were delivered in 1927 (road number 3751), 1928 (road numbers 3752 through 3760) and 1929 (road numbers 3761 through 3764). Curiosly, 3751 was listed in Santa Fe's diagram book as a "Heavy Mountain". 05001557. Added to NRHP. January 25, 2006. Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving original Spokane, Portland and Seattle steam locomotive. It was built by the Baldwin Locomotive Works in May 1938.The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ...Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957.Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ... Factor of adh. The Norfolk and Western class J was a class of fourteen 4-8-4 "Northern" streamlined steam locomotives built by the Norfolk and Western Railway (N&W) at its Roanoke Shops in Roanoke, Virginia between 1941 and 1950. They performed flawlessly, making them the most powerful 4-8-4 steam locomotives ever produced.4-4-4T Cóndor of the Gran Ferro­carril de Venezuela in 1901. The 3 ft 6 in (1,067 mm) gauge Gran Ferrocarril de Venezuela (Great Venezuela Railway) acquired a class of three 4-4-4T locomotives in 1892, the Cóndor, Gavilán and Halcón. They were built by Hartmann's Sächsische Maschinenfabrik in Chemnitz, Germany. Their maximum speed was 70 ... The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ... The Atchison, Topeka & Santa Fe bought a total of 65 4-8-4s, in four batches, all from the Baldwin Locomotive Works. The first group of 14 were delivered in 1927 (road number 3751), 1928 (road numbers 3752 through 3760) and 1929 (road numbers 3761 through 3764). Curiosly, 3751 was listed in Santa Fe's diagram book as a "Heavy Mountain".Works numbers were 633-642. One of the largest locomotives operated in Australia, these mixed-traffic engines were designed by FJ Shea. Although built in England, the bar frames were subcontracted from Baldwin. Although delivered as Mountains (4-8-2), they became Northerns beginning in 1929 to accommodate a booster that supplied 8,000 lb (3,629 ... Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957.This caught the attention of the Western Maryland and in 1947 it took delivery of twelve 4-8-4s from the Baldwin Locomotive Works. Being a "southern" railroad WM rejected the name "Northern" and called its 4-8-4s "Potomacs". These twelve Class J-1 "Potomacs" (road numbers 1401 through 1412) were designed for freight service with 69" drivers, 26 ...Nov 21, 2010 · Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph) The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. The 25 Big Boy locomotives were built to haul freight over the Wasatch Range between Ogden, Utah, and Green ...4-8-8-4: 4'-8½" UP: UP engine house, Cheyenne, WY: operational: Alco (Schenectady) #69585, 11/1941: From Pomona, CA. Reacquired by the Union Pacific in July 2013. Restored to operation on May 1, 2019. Converted to burn oil. Temporarily uses the tender of UP 3985. Became the first-ever steam locomotive to be equipped with Positive Train Control ...Santa Fe 3751. Santa Fe 3759. Santa Fe Class 2900. South African Class 25 4-8-4. South African Class 25NC 4-8-4. South African Class 26 4-8-4. South Australian Railways 500 class (steam) South Australian Railways 520 class. Southern Pacific 4449.Jun 19, 2006 · Canadian National and its subsidiaries owned North America’s largest fleet of 4-8-4s, including five streamlined versions built in 1936 to haul passenger trains between Montreal and Toronto. James Adams Dual-purpose Northerns followed, with examples going to Canadian National, Grand Trunk Western, Burlington, and Chicago & North Western. The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483,The B&O bought thirteen 4-8-2s from the Boston & Maine. They were given road numbers 5650 through 5662 and were designated as Class T-4 and were used until 1958. There are no surviving B&O "Mountains". The Class Ts (numbers 5500 & 5501) were scrapped in 1953.The 2-8-4's 4-wheel trailing truck permitted a huge firebox to be located after the boiler. The resulting greater steaming rate ensured that such a locomotive would never run out of power at speed, a common failing of older locomotives. Applying the ideas of the freight-minded Berkshire type to the Pacific resulted in a 4-6-4 locomotive.Jun 12, 2006 · Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ... Each end of the double-ended locomotive has a four-wheel truck to guide the locomotive at speed, giving the R1 a 4-8-4 wheel arrangement in the Whyte notation (AAR: 2-D-2; UIC: 2'Do'2). Besides the R1, the PRR did not build or order any other 4-8-4 locomotives, however the T1 duplex was essentially a 4-8-4 with 2 sets of driving wheels, making ... Chesapeake & Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the ...4-8-4+4-8-4. Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units.Bachmann Trains Online Store! : 4-8-4 Northern - Gift Shop Catalogs HO Parts Large Scale Parts N Parts On30 Parts General Parts & Supplies O Scale - Williams Track DCC Sound Boards E-Z App boards Locomotive / Tender Speakers All Scale Kit Bashing ecommerce, open source, shop, online shopping, storeThe Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483,These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... May 11, 2023 · Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957. Improved HO 4-8-4 has looks and power. This HO 4-8-4 from Rivarossi is a welcome upgrade to an accurate and attractive model originally introduced in 1980. The new engine features RP-25 wheels, improved electrical pickup, flywheel drive, increased weight for traction, and wiring for plug-in installation of Digital Command Control (DCC). Jun 16, 2020 · O gauge Union Pacific 4-8-8-4 Big Boy by Lionel Price: $1199.99 no. 1932163 Features: O-31 operation, two can-style motors, LionChief Plus 2.0 command and sound system, smoke unit, remote coupler Low speed (cmd): 1.7 scale mph Low speed (conv) 3 smph High speed: 76.2 smph Drawbar pull: 2 lb., 2 oz. Current production road name: Union Pacific Website: lionel.com The biggest 4-8-4 Steam Locomotives. Category page. Edit. A 4-8-4 "Northern" is a type of wheel-arrangement for a large tender-type steam locomotive. Which refers to engines with 4 leading wheels, 8 driving wheels and 4 trailing wheels.Southern Pacific 4449, also known as the Daylight, is the only surviving example of Southern Pacific Railroad 's "GS-4" class of 4-8-4 "Northern" type steam locomotives and one of only two GS-class locomotives surviving, the other being "GS-6" 4460 at the National Museum of Transportation in St. Louis, Missouri. Strasburg Railroad, Strasburg, PA. operational. Baldwin (Burnham) #28343, 1906. From the IRM, Union, IL, then the Boone & Scenic Valley Railroad, Boone, IA. Featured in Thomas & The Magic Railroad. Taken out of service in late 2018. Returned to operation in September 2019. Only operating 4-8-0 type in the US.Union Pacific 844 is a class "FEF-3" 4-8-4 "Northern" type steam locomotive owned and operated by the Union Pacific Railroad for its heritage fleet.Built in December 1944 by the American Locomotive Company (ALCO) of Schenectady, New York, No. 844 is one of four surviving FEF series locomotives and the only one in operation. Missouri Pacific 4-8-4 Northerns The Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns in the early 1940s. The rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles.Data from "4-8-4 Locomotives on the Northern Pacific," Baldwin Locomotives (1937), pp. 27-28 and NP to 1944 Locomotive Diagrams supplied in May 2004 by Allen Stanley from his extensive Rail Data Exchange. Works numbers were 62163-62166 in March 1938, 62167-62168. in April and 62169-62170 in May. As suggested by the 1937 account of the A-2s ...With this in mind, the 520 class was commissioned, combining the better features of the earlier 500 and 620 class locomotives. Design. The class used the 4-8-4 configuration of the modified 500B class, but was also designed for work on branch lines with light 60 lb/yd (29.8 kg/m) rail with a reduced tender load. The considerable weight of the ... The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ... Water cap. Factor of adh. Norfolk and Western 475 is a 4-8-0 "Mastodon" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line ...The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. HO scale UP 4-8-4. Price:$239.98. Manufacturer: Rivarossi, imported exclusively by Wm. K. Walthers Inc. P.O. Box 3039 Milwaukee, WI 53201 414-527-0770. Description: Plastic-and-metal ready-to-run Union Pacific steam locomotive. Features: Blackened metal wheels, driver tires, and side rods DCC decoder socket in locomotive Directional headlightsSanta Fe 3751. Santa Fe 3759. Santa Fe Class 2900. South African Class 25 4-8-4. South African Class 25NC 4-8-4. South African Class 26 4-8-4. South Australian Railways 500 class (steam) South Australian Railways 520 class. Southern Pacific 4449.The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ...4-8-4 Steam Locomotives. Category page. Edit. A 4-8-4 "Northern" is a type of wheel-arrangement for a large tender-type steam locomotive. Which refers to engines with 4 leading wheels, 8 driving wheels and 4 trailing wheels. The Santa Fe 3751 is a 4-8-4 steam locomotive, which is among the half-dozen such locomotives owned by the AT&SF. The Atchison, Topeka & Santa Fe Railway was a pioneer in developing better steam locomotives in the era of the presidency of Edward H. Ripley, who served from 1895 to 1920. In 1903, AT&SF developed the 2-10-2 wheel configuration ...Number 4000 was delivered to Omaha at 6PM, September 5, 1941. The 25 Big Boys were built in two groups. The first group of 20 locomotives, called "Class 1", were built starting in 1941. They were numbered 4000-4019. The second group of 5 locomotives, "Class 2", were built in 1944. They were numbered 4020-4024. The Lima-Southern Pacific GS-4 ("GS" meaning for "Golden State" or "General Service") is a type of semi-streamlined 4-8-4 Northern steam locomotive built by the Lima Locomotive Works in 1941 and 1942 specifically for the Southern Pacific (SP) Railroad. They were assigned road numbers 4430 through 4457. The GS-4s were principally employed on SP's famous "Daylight" streamliners from 1941, but in ...The Great Northern Railway obtained its first "Northerns" in 1929, when six Class S-1s were delivered from the Baldwin Locomotive Works. These 4-8-4s were given road numbers 2550 through 2555 and had 73" drivers, 28 x 30 cylinders, a boiler pressure of 250 psi, a weight of 472,120 lbs and a tractive effort of 68,466 pounds. Nov 21, 2010 · Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph) The 4-8-4 filled the same roles as the 4-8-2. The first Northerns built were intended for passenger service, and were supplied to the Santa Fe, Great Northern, Southern Pacific, and Lackawanna (which called them Poconos), to name a few roads.The 2-8-4's 4-wheel trailing truck permitted a huge firebox to be located after the boiler. The resulting greater steaming rate ensured that such a locomotive would never run out of power at speed, a common failing of older locomotives. Applying the ideas of the freight-minded Berkshire type to the Pacific resulted in a 4-6-4 locomotive. In 1930, the SP designed a locomotive similar to those Mountains that had a very large firebox (90.4 sq ft) and a four wheel trailing truck to support it. Thus, evolved the Southern Pacific 4-8-4 which was designated Class GS (Golden State) by the SP. In early 1937, six more "Golden States" arrived but this time from the Lima Locomotive Works.The Nashville, Chattanooga & St. Louis Railroad bought five 4-8-4 locomotives in 1930, which they called "Dixies" (instead of "Northerns" - a name that would seem inappropriate on a fine southern railroad). These 1930 "Dixies" came from the American Locomotive Company and were designated Class J-2 and assigned road numbers 565 through 569.Improved HO 4-8-4 has looks and power. This HO 4-8-4 from Rivarossi is a welcome upgrade to an accurate and attractive model originally introduced in 1980. The new engine features RP-25 wheels, improved electrical pickup, flywheel drive, increased weight for traction, and wiring for plug-in installation of Digital Command Control (DCC). Missouri Pacific 4-8-4 Northerns The Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns in the early 1940s. The rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles. Union Pacific 4-8-4. Union Pacific class FEF-3 No. 841 stands for a builder's portrait at the American Locomotive Co. in 1944. The 10 FEF-3s were the final steam engines acquired by UP, which still operates one, No. 844, occasionally. Alco photo.Data from "4-8-4 Locomotives on the Northern Pacific," Baldwin Locomotives (1937), pp. 27-28 and NP to 1944 Locomotive Diagrams supplied in May 2004 by Allen Stanley from his extensive Rail Data Exchange. Works numbers were 62163-62166 in March 1938, 62167-62168. in April and 62169-62170 in May. As suggested by the 1937 account of the A-2s ... What Features Do the Steam Locomotives Have? Live Steam: Steam locomotives that produce live steam look life-like when moving around the track. The puffing smoke comes out the die-cast metal stack. Wheel Arrangement: Models with 4-8-4 configurations means there are 4 leading, 8 driving, and 4 trailing wheels. You'll find other steam locomotives ...Nov 21, 2010 · Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph) S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight..In 1930, the SP designed a locomotive similar to those Mountains that had a very large firebox (90.4 sq ft) and a four wheel trailing truck to support it. Thus, evolved the Southern Pacific 4-8-4 which was designated Class GS (Golden State) by the SP. In early 1937, six more "Golden States" arrived but this time from the Lima Locomotive Works.It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer:The Great Northern Railway obtained its first "Northerns" in 1929, when six Class S-1s were delivered from the Baldwin Locomotive Works. These 4-8-4s were given road numbers 2550 through 2555 and had 73" drivers, 28 x 30 cylinders, a boiler pressure of 250 psi, a weight of 472,120 lbs and a tractive effort of 68,466 pounds. 4-8-4 Steam Locomotives. Category page. Edit. A 4-8-4 "Northern" is a type of wheel-arrangement for a large tender-type steam locomotive. Which refers to engines with 4 leading wheels, 8 driving wheels and 4 trailing wheels. Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds. The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483, Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds. The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...Union Pacific 4014 is a steam locomotive owned and operated by the Union Pacific (UP) as part of its heritage fleet. It is a four-cylinder simple articulated 4-8-8-4 "Big Boy" type built in 1941 by the American Locomotive Company (ALCO) at its Schenectady Locomotive Works. It was assigned to haul heavy freight trains in the Wasatch mountain ... The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ...4-8-4. The Northerns are steam locomotives that represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees ... 05001557. Added to NRHP. January 25, 2006. Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving original Spokane, Portland and Seattle steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. The wheel arrangement of small diesel and petrol locomotives can be classified using the same notation as steam locomotives, e.g. 0-4-0, 0-6-0, 0-8-0. Where the axles are coupled by chains or shafts (rather than side rods) or are individually driven, the terms 4w (4-wheeled), 6w (6-wheeled) or 8w (8-wheeled) are generally used. The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ... Jun 19, 2006 · Canadian National and its subsidiaries owned North America’s largest fleet of 4-8-4s, including five streamlined versions built in 1936 to haul passenger trains between Montreal and Toronto. James Adams Dual-purpose Northerns followed, with examples going to Canadian National, Grand Trunk Western, Burlington, and Chicago & North Western. The Atchison, Topeka & Santa Fe bought a total of 65 4-8-4s, in four batches, all from the Baldwin Locomotive Works. The first group of 14 were delivered in 1927 (road number 3751), 1928 (road numbers 3752 through 3760) and 1929 (road numbers 3761 through 3764). Curiosly, 3751 was listed in Santa Fe's diagram book as a "Heavy Mountain".The Delaware, Lackawanna & Western designed and purchased five 4-8-4s (road numbers 1501 through 1505) to increase its motive power for the "Lackawanna Limited" and other passenger trains. These locomotives were assigned Class Q-1 and were built by the American Locomotive Company after the Northern Pacific took delivery of the first 4-8-4s in 1927.Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds. The Canadian National Class U-4a was a class of five streamlined 4-8-4 Northern type steam locomotives they were built by the Montreal Locomotive Works in 1936 for the Canadian National Railway, numbered 6400 to 6404. These engines were used for crack passenger service on the Canadian National Railway for much of their careers. The Canadian National U-4 class was a result of wind tunnel ...

Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display.. Sandp500 history chart

locomotive 4 8 4

The Santa Fe 3751 is a 4-8-4 steam locomotive, which is among the half-dozen such locomotives owned by the AT&SF. The Atchison, Topeka & Santa Fe Railway was a pioneer in developing better steam locomotives in the era of the presidency of Edward H. Ripley, who served from 1895 to 1920. In 1903, AT&SF developed the 2-10-2 wheel configuration ...Improved HO 4-8-4 has looks and power. This HO 4-8-4 from Rivarossi is a welcome upgrade to an accurate and attractive model originally introduced in 1980. The new engine features RP-25 wheels, improved electrical pickup, flywheel drive, increased weight for traction, and wiring for plug-in installation of Digital Command Control (DCC). Nov 1, 2004 · It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer: The Lima-Southern Pacific GS-4 ("GS" meaning for "Golden State" or "General Service") is a type of semi-streamlined 4-8-4 Northern steam locomotive built by the Lima Locomotive Works in 1941 and 1942 specifically for the Southern Pacific (SP) Railroad. They were assigned road numbers 4430 through 4457. The GS-4s were principally employed on SP's famous "Daylight" streamliners from 1941, but in ...4-8-4: 4'-8½" AT&SF: Locomotive Park, 315 W Beale St (US 93), Kingman, AZ: display: Baldwin #60385, 1928: 261: S-3: 4-8-4: 4'-8½" CMStP&P: GN Shops/Minneapolis Junction, Minneapolis, MN: operational: Alco (Schenectady) #71974, 07/1944: Restored to operation in 1993. Taken out of service in 2008. Returned to operation on December 12, 2012.May 12, 2023 · Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. History Thierry Stora, of the French Compound Locomotives homepage, contends that the problems lay in the difference between the specified minimum curve radius (80 m or 262 ft) and the actual minimum, which could be as low as 50 m (164 ft). As a result, these 4-8-4s were limited to 50 mph (80 kph)The Nashville, Chattanooga & St. Louis Railroad bought five 4-8-4 locomotives in 1930, which they called "Dixies" (instead of "Northerns" - a name that would seem inappropriate on a fine southern railroad). These 1930 "Dixies" came from the American Locomotive Company and were designated Class J-2 and assigned road numbers 565 through 569. O gauge Union Pacific 4-8-8-4 Big Boy by Lionel Price: $1199.99 no. 1932163 Features: O-31 operation, two can-style motors, LionChief Plus 2.0 command and sound system, smoke unit, remote coupler Low speed (cmd): 1.7 scale mph Low speed (conv) 3 smph High speed: 76.2 smph Drawbar pull: 2 lb., 2 oz. Current production road name: Union Pacific Website: lionel.com The biggestThe big J3 engine, the sole survivor of a class of 20 built during the desperate days of World War II, is a 1942 product of the American Locomotive Company. The last time someone proposed removing the 4-8-4 from Centennial Park, in 2001, the parks board declined the offer.Jim Wrinn. 4-8-4. •YEARS BUILT: 1926 to 1950. •MANUFACTURERS: Baldwin, Lima, Alco, Canadian Locomotive Co., Canadian Pacific Railway, Montreal, Norfolk & Western. •OPERATED ON: Most sizable railroads that provided fast freight and passenger service.Improved HO 4-8-4 has looks and power. This HO 4-8-4 from Rivarossi is a welcome upgrade to an accurate and attractive model originally introduced in 1980. The new engine features RP-25 wheels, improved electrical pickup, flywheel drive, increased weight for traction, and wiring for plug-in installation of Digital Command Control (DCC). Union Pacific 4014 is a steam locomotive owned and operated by the Union Pacific (UP) as part of its heritage fleet. It is a four-cylinder simple articulated 4-8-8-4 "Big Boy" type built in 1941 by the American Locomotive Company (ALCO) at its Schenectady Locomotive Works. It was assigned to haul heavy freight trains in the Wasatch mountain range.Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units. There was an almost forgotten earlier 4-8-4 built in 1931 by ALCO. This three-cylinder experimental locomotive carried road number 800 and was designated Class HS-1a. It did not do well on its test runs and was put to work as a hump engine at Selkirk yard. Unfortunately, EMD F-7 passenger diesels were being delivered at the same time as the 4-8 ...Water cap. Factor of adh. Norfolk and Western 475 is a 4-8-0 "Mastodon" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line ... .

Popular Topics